Loading ...
Loading ...
Loading ...
10. Once all the orifices are installed, replace all burner sand burner caps, then fire up the
burners to check the minimum flame height.
11. Minimum flame height should be approx. ¼” tall. You will want a small minimum flame
for simmering. There is a small adjustment screw located on the valve itself, the front
control panel must be removed in order to make the adjustment.
12. To remove the control panel remove the two bottom screws holding the panel on.
13. Next slide out the panel, there are notches at the top positing the panel in place.
14. Using a 3/32'' X 3” screw driver or similar you can make the adjustment. Turn to
minimumflamethenadjustthescrewcounterclockwiseforasmallerflameand clock wise for a
larger flame. Replace the lid, burners, burner caps and grates, adjust and recheck the
flame.
15. Once your happy with the minimum flame height replace the front control panel with
the two screws earlier removed.
25
Loading ...
Loading ...
Loading ...