Loading ...
Loading ...
Loading ...
●
C
Pair the watch with a phone.
Before you can use the watch in combination
with a phone, you first need to pair them.
1. Move the phone to be paired with close to
(within one meter of) the watch.
2.
Y
Tap the “CASIO WATCHES” icon.
3.
Y
Tap the of the “My Watch” tab.
4.
Y
Perform the operation shown on the
phone screen to register the watch to the
CASIO WATCHES phone app.
5.
X
Hold down (C) for at least two seconds
until the second hand points to 12 o’clock.
●
When pairing is complete, the second
hand will move to [C].
Note
●
The first time you start up the CASIO
WATCHES phone app, a message will
appear on your phone asking if you
want to enable location information
acquisition. Configure settings to allow
background use of location
information.
Auto Time Correction
Your watch will connect with a phone at preset
times each day and correct its time settings
automatically.
●
Using This Function
Your watch corrects its time setting four times
a day according to a preset schedule. If you
leave your watch in the Timekeeping Mode, it
will perform the correction operation
automatically as you go about your daily life,
without any operation required by you.
12:30
Important!
●
Note that the watch will not perform
auto time correction if it enters the
Timekeeping Mode while any one of
the conditions below exists.
ー
While a stopwatch elapsed time
measurement or timer countdown
operation is in progress
ー
Battery power is low.
ー
Watch is in Level 2 power saving.
ー
While the watch is too far away from
its paired phone
ー
While communication is not possible
due to radio interference, etc.
ー
While the phone is updating its
system
Note
●
If the watch does not indicate the
correct time even if is able to connect
with a phone, correct the hand and
date indicator positions.
l
Correcting Hand and Day
Indicator Alignment
●
If there is a World Time City specified
with the CASIO WATCHES phone
app, its time will also be synchronized
automatically.
●
The watch will connect with the phone
and perform auto time correction at
around 12:30 a.m., 6:30 a.m., 12:30
p.m. and 6:30 p.m. The connection is
automatically terminated after auto
time correction is complete.
●
Summer Time
Once the watch is connected with a phone and
its time is corrected with the phone time, its
Home City time and World Time will
automatically switch between standard time
and summer time as required, even if the
watch is no longer connected with the phone.
l
Summer Time Switching
●
Adjusting the time setting manually with a
watch operation will cancel auto standard
time/summer time switching.
●
A CASIO WATCHES screen shows
information about summer time periods.
●
Triggering Immediate Time Correction
The watch’s time setting will be corrected
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to trigger immediate time
correction, perform the procedure below to
connect with a phone.
1. Move the phone close to (within one meter
of) the watch.
2.
X
Press (C).
This causes the second hand to move to
[R]. When the watch connects with a
phone, the second hand moves to [C] and
then the watch’s time setting
synchronizes with the phone’s time.
●
At this time your current location is
recorded by your phone.
●
The connection is terminated
automatically after time correction is
complete.
30
Watch Operation Guide 5719
12
Loading ...
Loading ...
Loading ...