Loading ...
Loading ...
Loading ...
45MAINTENANCE
ENGLISH
installation location and ambient
temperature of the appliance.
3 When thawing is complete, dry clothes as
usual.
Thawing out the Appliance Manually
1 Open the dryer door and pull out both the
inner and outer filters.
2 Carefully pour 34 oz. (1 liter) of hot water at
140 ℉ / 60 ℃ into the lint filter compartment
and then reinsert both lint filters.
CAUTION
• Pouring more that 51 oz. (1.5 liters) of water into
the compartment will cause water to leak out.
• Wear gloves and use care when pouring hot
water. 140 ℉ / 60 ℃ water can cause scalding or
burns. Using water that is hotter than that can
cause the appliance to malfunction.
3 Turn on the appliance and run the Normal
cycle for about 30 seconds. Then wait about
30 minutes.
4 Run the Normal cycle again. Check if the OE
message appears within 10 minutes of
running the appliance.
•If the
OE message appears go to step 2 and
repeat procedure.
•If the OE message does not appear, the
thawing process is done.
5 When thawing is complete, dry clothes as
usual.
Loading ...
Loading ...
Loading ...