Vivotek TB9331-E Vivotek TB9331-E User Manual

Loading ...

VIVOTEK

108 - User's Manual

Transparent HTTP Tunnel: If you want to use your own RS-485 device, you can use UART

commands to build a Transparent HTTP Tunnel. The UART commands will be sent through HTTP

tunnel established between the RS-485 device and the camera. For detailed application notes,

please refer to URL Commands started on page 144 or

https://vivotek.force.com/Customers/s/

to search

for the article.

Preset Positions

If you select DynaDome/SmartDOME, Lilin PIH-7x00, Pelco D, Pelco P protocol as the PTZ driver

and click the

Save

button, the

Preset Position

button will become available. Click on the

Preset

Position

button to open the conguration window. A total of 20 preset positions can be congured.

Please follow the steps below to congure preset positions:

1. Adjust the shooting area to the desired position using the buttons on the right side of the window.

2. Enter a name for the preset position, which allows for up to forty characters. Click

Add

to enable

the settings. The preset positions will be displayed under the Preset Location list on the left-

hand side.

3. To add additional preset positions, please repeat steps 1~2.

4. To remove a preset position from the list, select it from the drop-down list and click

Remove

5. The preset positions will also be displayed on the main page. Please refer to the illustration on

the next page.

6. Click

Save

to enable the settings.

2018/1/20 13:39:20

Functions are the same as

the Control Panel on the

home page

Loading ...

Vivotek TB9331-E Infrared Thermal Bullet Camera