Hikvision DS-PDC10AM-EG2-WE Wireless PIR AM Curtain Detector

- All the electronic operation should be strictly compliance with the electrical safety regulations, re prevention regulations and other related

regulations in your local region.

- Do not drop the device or subject it to physical shock, and do not expose it to high electromagnetism radiation. Avoid the equipment

installation on vibrations surface or places subject to shock (ignorance can cause equipment damage).

- Please make sure that the power has been disconnected before you wire, install or dismantle the device.

- If smoke, odors or noise rise from the device, turn o the power at once and unplug the power cable, and then please contact the service

Exposing the equipment to direct sun light, low ventilation or heat source such as heater or radiator is forbidden (ignorance can cause re

danger).

- Do not aim the device at the sun or extra bright places. A blooming or smear may occur otherwise (which is not a malfunction however), and

aecting the endurance of sensor at the same time.

- Improper use or replacement of the battery may result in hazard of explosion. Replace with the same or equivalent type only. Dispose of

used batteries according to the instructions provided by the battery manufacturer.

- Do not expose the device to the corrosive gas. Otherwise the equipment damage may occur.

- Do not expose the device to the explosive situation.