Loading ...
Loading ...
Loading ...
Using for the first time
24
Setting the water hardness
The display will change to the screen
for setting the water hardness.
- The dishwasher needs to be
programmed to the correct water
hardness for your area.
- Your local water authority will be able
to advise you of the water hardness
level in your area.
- Where the water hardness fluctuates,
e.g. between 1.8 and 2.7mmol/l (10-
15°dH - German scale), always
programme the dishwasher to the
higher value (2.7mmol/l or 15°dH in
this example).
In the event of a fault, it will help the
service technician if you know the
hardness of your local water supply.
Enter the water hardness below:
____________mmol/l
The dishwasher is programmed at the
factory for a water hardness level of
0.36 mmol/l (2 °dH - German scale).
Set the water hardness level in your
area and confirm with OK.
See “Settings - Water hardness” for
more information.
Activating AutoDos
The display changes to the settings
screen for AutoDos (see “Detergents -
Automatic dispensing/AutoDos”).
Even if you do not wish to use
AutoDos, you must remove the
transport locking device from the
PowerDisk compartment before
running the first programme (see
“Detergents - Activating AutoDos”).
You can activate AutoDos.
If you do not wish to use AutoDos, you
can manually dispense the detergent
via the detergent compartment (see
“Detergents - Manual detergent
dispensing”).
Select the setting you want and
confirm with OK.
This setting applies to all programmes
and can be changed at any time using
the AutoDossensor.
Loading ...
Loading ...
Loading ...