Weber 1500378 Q 2800N+ Portable Electric Grill with 320 sq. in. Cooking Surface,

Note: It is important that all burner control knobs are in the

o position before turning on the LP tank. If they are not,

the flow limiting device built into the regulator will activate,

limiting the flow of gas from the LP tank.

3) Turn the LP tank on by slowly turning the tank valve

Note: It is important that the LP tank is turned on slowly.

Ifit is opened too quickly, the flow limiting device built into

the regulator will activate, limiting the flow of gas from the

position.

6) Check that the burner is lit by looking through the

7) If the burner does not ignite within 5 seconds, turn

burner control knob to the o

position and wait five

minutes to allow the gas to clear before attempting to

light the burner again.

8) If the burner ignites, the problem lies in the ignition

system. For piezo igniters, check the wire connections of

removed before installing battery. Do not confuse this

plastic with the battery label.

If you are still experiencing any

problems, contact the CustomerService

Representative in your area using the

contact information on weber.com.

There is a problem with gas flow. If the grill will not ignite, the first step is to determine if there is gas flowing to the burners. Tocheck this, follow the

instructions below for “Using a Match to Determine if there is Gas Flow to the Burners.”

If match lighting IS NOT successful, follow the instructions for disconnecting and reconnecting the LP tank.

There is a problem with the ignition system. If the grill will not ignite, the first step is to determine if there is gas flowing to the burners. Tocheck this, followthe instructions

below for “Using a Match to Determine if there is Gas Flow to the Burners.”

If match lighting IS successful, check the condition of the battery (electronic ignition systems only) and check the wire

connections of the IgnitionSystem.