Loading ...
Loading ...
Loading ...
©2019 Hestan Commercial Corporation
7
EN
29. Never use charcoal, pellets, wood, or any other solid fuel in the grill. Wood chips for smoking are to be
used with the smoker accessory only. See the SMOKER section of this manual.
30. Only certain types of glass, heatproof glass-ceramic, earthenware, or other glazed utensils are suitable for
grill use. However, these types of materials may break with sudden temperature changes. Use only on
low or medium heat settings, and according to their manufacturers’ directions.
31. Do not lean on side shelves or place a load of more than 25 lbs (11.3 kg) on a side shelf.
32. Do not repair or replace any part of the grill unless specifically recommended in this manual. All other
warranty and non-warranty service should be referred to and performed by a qualified technician.
33. For proper lighting and performance of the burners, keep the ports clean. It is necessary to clean them
periodically for optimum performance. The burners will operate only in one position and must be
mounted correctly for safe operation. See BURNER ADJUSTMENT section of this manual.
34. Clean the grill with caution. Avoid steam burns - do not use a wet sponge or cloth to clean the grill while
it is hot. Some cleaners produce noxious fumes or can ignite when applied to a hot surface. Be sure all
grill controls are turned off and the grill is cool before using any type of aerosol cleaner on or around the
grill. The chemical that produces the spraying action could, in the presence of heat, ignite or cause metal
parts to corrode. Clean and perform general maintenance on the grill twice a year. Watch for corrosion,
cracks, or insect activity. See the CLEANING AND MAINTENANCE section of this manual.
PRECAUTIONS - BEFORE YOU USE YOUR GRILL
(continued)
REGULATORY / CODE REQUIREMENTS
Installation of this cooking appliance must be made in accordance with local codes. In the absence of local
codes, this unit should be installed in accordance with the National Fuel Gas Code
ANSI Z223.1/NFPA 54
,
Natural Gas and Propane Installation code
CSA B149.1
, or Propane Storage and Handling Code
B149.2
.
All Electrical Components must be electrically grounded in accordance with local codes or in the absence of
local codes with the National Electrical Code
ANSI/NFPA 70
, or Canadian Electrical code
CSA C22.1
.
STATE OF MASSACHUSETTS
Massachusetts requires all gas be installed using a plumber or gas fitter carrying the appropriate
Massachusetts license. All permanently installed natural gas or propane installations require a T handle type
manual gas valve be installed in the gas supply line to this appliance. This does not apply to portable propane
installations using a 20lb. cylinder.
CALIFORNIA PROPOSITION 65 - WARNING
WARNING: This product can expose you to chemicals including carbon monoxide, which is
known to the State of California to cause birth defects and other reproductive harm. For more
information, go to www.P65Warnings.ca.gov.
PORTABLE LP GAS CYLINDERS
Use only a standard 20 lb. (9.1kg) liquid propane (LP) gas cylinder - 12.25” diam. X 18.25” H (31cm X 47cm)
which features an Overfill Protection Device. The cylinder must be installed in the upright position. Do not
use a dented or rusty LP cylinder as it may be hazardous and should be checked by your LP supplier. Never
use a cylinder with a damaged valve. Never move or alter the gas fittings. Check the expiration date on the
cylinder collar as well. Do not refill an expired cylinder, it must be replaced. If you buy refilled (exchange)
LP cylinders, check this date as well.
The LP gas cylinder must be constructed and marked in accordance with the specifications for LP gas
cylinders of the U.S. Department of Transportation (DOT). The cylinder must be provided with a shut off
valve terminating in an LP gas supply cylinder valve outlet specified, as applicable, for connection type QCC1
in the standard for compressed gas cylinder valve outlet and inlet connections ANSI/CGA-V-I.
Certain liquid propane dealers may fill LP cylinders for use in the grill beyond cylinder filling capacity.
This “overfilling” may create a dangerous condition due to a build-up of excess pressure. As a safety device,
there is a pressure relief valve which will vent propane gas vapor to relieve this excess pressure. This vapor
Loading ...
Loading ...
Loading ...