Loading ...
Loading ...
Loading ...
16
INSTALLATION INSTRUCTIONS
Mounting the Range Hood
CAUTION
%
At least two installers are required due to the
weight and size of the hood.
1
Select the preferred ducting application (vertical
or horizontal) and prepare the hood. Refer to
page 14 for single blower horizontal ducting.
2
Plumb and mark center line.
3
Choose the desired height above the cooking
surface (26" minimum). Level and mark the
hood bottom (line A in Fig. 1).
4
Level and mark the top of the wood board (line
B in Fig. 1), 16 7/8" from line A.
5
Draw a center line on the wood board as
shown. Align the center of the board with the
center line on the wall and align the top of the
board with line B. Attach the board to the wall
studs using four M6 wood screws.
Wood Board Dimensions : (W x D x H)
SKSPH3602S - 33" x 1/2" x 4"
SKSPH4802S - 45" x 1/2" x 4"
6
Prepare the duct pipe and duct cutouts in
the upper cabinet if needed, or in the wall if
ducting the hood horizontally. Refer to the
hood specifications on page 8 for duct cutout
dimensions.
7
Prepare the electrical wiring and electrical
cutouts in the upper cabinet if needed, or in the
wall if horizontal electrical hook up is required.
Refer to the hood specifications on page 8 for
electrical cutout dimensions.
8
Mount the hood onto the wood board and
secure it using four M6 wood screws.
9
Insert two M6 wood screws into the wall
through the screw holes in the lower body. See
Fig. 2 for dimensions between screw holes.
10
Install the electrical connection.
11
Install the ductwork and seal it with certified
aluminum duct tape.
12
Power up the hood and check for leaks around
the duct tape.
13
Install the baffle filters.
C/L
C/L
A
B
16
7
/
8
"
min 26"
4"
wood board
FIG. 1
3
5
/
16
"
21
1
/
4
"
5
5
/
16
"
16
7
/
8
"
27
3
/
8
" (36" & 42"),
35
1
/
4
" (48" & 54")
1
11
/
16
"
16
1
/
8
"
13
5
/
8
"
FIG. 2
WARNING
%
Electrical wiring must be done by qualified
personnel in accordance with all applicable
codes and standards.
%
This range hood must be properly grounded.
Turn off electrical power at main power supply
before wiring.
Loading ...
Loading ...
Loading ...