Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/10321443-ids-7608nxi-m2-x/bg2b.png)
as mul-address, the Default Route of the device should be in the same network segment as that
of the LAN IP address of the router.
Steps
1. Go to System → System Sengs → Network → Network Service → NAT .
Figure 4-13 Port Mapping (NAT)
2. Turn on Enable.
3. Set Mapping Mode.
Auto
The port mapping items are read-only, and the external ports are set by the router
automacally.
Manual
You can manually edit the external port.
4. If Mapping Mode is selected as Manual, click to edit corresponding ports.
Note
●
The value of the RTSP port number should be 554 or between 1024 and 65535, while the
value of the other ports should be between 1 and 65535 and the value must be dierent from
each other. If mulple devices are congured for the UPnP™ sengs under the same router,
the value of the port No. for each device should be unique.
●
External Port indicates the internal port number for port mapping in the router.
5. Click Save.
What to do next
Enter the virtual server sengs page of router, then ll in the blank of internal/external source
port with the internal/external port value, and other required contents.
Network Video Recorder User Manual
17
Loading ...
Loading ...
Loading ...