Loading ...
Loading ...
Loading ...
4
AXIS 241Q/S Blade - Rack Solution Installation Guide
Control Button
See the AXIS 241Q/S User’s Manual for information on the use of the
control button.
Indicators
Video In/Out
AXIS 241Q Blade
Accommodates up to 4 separate video sources (VIDEO 1- VIDEO 4)
simultaneously. Each supported video input is terminated using a
coax/BNC connector. Physical connections made using RG59 75 Ohm
coax video cable have a recommended maximum length of 800 feet
(250 meters).
AXIS 241S Blade
• Coaxial BNC connector supporting a single video source. The
physical connection is made using RG59, 75 Ohm coax video
cable; with a recommended maximum length of 800 feet (250 meters).
• A single video loopthrough (VIDEO OUT) connected in parallel with VIDEO IN and terminated with a
coax/BNC connector allows direct connection of an external monitor. Set dip switch to OFF when in
use.
The AXIS 241S Blade supports conversion between composite video and Y/C (s-video) using a Y/C to BNC
cable (available as optional accessory). See the table on page 5 for DIP switch settings.
Product Label
S/N (serial number) is identical to the unit’s MAC/Ethernet address, e.g. 00408C1A2B3C = 00-40-8C-1A-2B-3C.
P/N (part number) is the product model number.
Network Amber Flashes for activity on a 10 Mbit/s network
Green Flashes for activity on a 100 Mbit/s network
Red Flashes rapid red for hardware error, together with the
Status indicator
None No connection
Status Green Normal operation
Amber Flashes during reset to factory default or at firmware
upgrade
Red Flashes rapid red for a hardware error, together with the
Network indicator
Power Green Normal operation
Amber Flashes green/amber during upgrade
P/N: XXXX-YYY-ZZ
P/N: XXXX-YYY-ZZ
Top and bottom screws (PZ1-type
screws) are used to secure the blade.
IMPORTANT! You must use a Pozi
drive screwdriver to avoid stripping
the screw heads.
Loading ...
Loading ...
Loading ...