Loading ...
Loading ...
Loading ...
EN
©2021 Hestan Commercial Corporation
14
CLEANING AND MAINTENANCE
(continued)
TO REPLACE A LIGHT BULBTO REPLACE A LIGHT BULB
1. MAKE SURE POWER IS OFF! Unplug the unit or turn off power at the breaker. MAKE SURE
THE LAMP IS COOL. The hot lens and/or bulb can be VERY hot.
2. You may wish to remove the drawer (see page 12) before changing the bulb.
3. Use a small flat-blade screwdriver to carefully pry off the glass lens at the top edge of the lens,
and set aside. Reach into the lamp housing and pull out the old light bulb.
4. Before installation, it is very important to clean the new bulb carefully with a clean, soft cloth
or tissue paper. Grease, fingerprints, or oils in your skin can leave a residue on the glass surface
of the bulb which will create a hot-spot. The bulb will eventually crack at this hot-spot.
5. While still using a cloth or tissue paper, insert the new bulb in the lamp housing. Push the bulb
fully into the socket.
6. Re-install the glass lens taking note of the cutout in the glass which aligns with the bulb socket.
7. Restore the power and check if the new bulb is working.
8. If the drawer was removed, re-install it.
CUTOUT
IN LENS
BULB
Loading ...
Loading ...
Loading ...