Loading ...
Loading ...
Loading ...
1312
ENEN
2.5 Installation cutout features:
Stainless exterior Pro
(North American standard cutout width)
A
Minimum cutout height
2134 mm (84”)
Minimum cutout width
36” model: 914 mm (36”)
30” model: 762 mm (30”)
24” model: 610 mm (24”)
Depth with door
635 mm (25 ”)
Area to be left clear for the anti-tipping brackets
127 mm (5”) for both right and left sides
B
Appliance height
2120 mm (83 1/2”) + 25 mm (1”)
When installing
our top
compressor
models in a
standard NA
cut out it is
recommended to
use the J-profile
trim kit to close
the lateral gap
of the appliance,
alternatively use
the standard
plastic mounting
clips when
installing unit
into Euro width
cabinet. (Shown
on next page)
Installing in the
unit in a standard
North American
“cutout” without
the J-profile trim
kit, will result
in a larger gap
along the cabinet
opening.
Door Swing Clearance
Minimum distance from
the wall (hinge side)
2. TECHNICAL REQUIREMENTS
With of appliance body.
Width of cladded door
Width of appliance with
mounting brackets installed
(eective width)
B
A
A A
140 (5 ½”) 140 (5 ½”)
36”: 914 mm (36”)
24”: 610 mm (24”)
30”: 762 mm (30”)
100 (4”) 100 (4”)
min 2134
(84”)
560 (22”)
635 (25”)
693 (27 ¼”)
195 (7 ⅝”)
8 (⅜”)
8 (⅜”)
97 (3 ⅞”)
+ 25 (1”)
2120 (83 ½”)
+25 (1”)
613 (24 ⅛”)
+25 (1”)
1296
(50”)
516
(20 ⅜”)
100°
36" model: 230 mm (9”)
30" model: 195 mm (7 ¾”)
24" model: 160 mm (6 ¼”)
36" model: 1470 mm (57 ⅞”
)
30" model: 1320 mm (52”)
24" model: 1170 mm (46”)
1016 mm (40”)
36” model: 935 mm (36 ¾”)
30” model: 785 mm (30 ⅞”)
24” model: 635 mm (25”)
36”:880mm (34 ⅝”)
30”:730mm (28 ¾”)
24”:580mm (22 ⅞”)
635 mm (25”)
560 mm (22”)
75 mm (3”)
36” model: 914 mm (36”)
30” model: 762 mm (30”)
24” model: 610 mm (24”)
58 mm (2 ¼”)
J profile
code FXJTRIMSS
19 (
¾”
)
7 (
¼”
)
7 (
¼”
)
25 (
1”
)
60 (2
⅜”
)
131 (5
⅛”
)
Due to the nature of the design of this model
(Euro width), in order to improve the aesthetics
when installing into an existing standard
North American width cut-out, the J-Profile
trims serve a dual purpose by increasing the
effective width of the model overlapping the
side gables and improving the transition for
a proud (not flush) installation as this model
is also slightly deeper at 25” than a standard
cut-out. cabinet. (Shown on next page)
Loading ...
Loading ...
Loading ...