Loading ...
Loading ...
Loading ...
www.PyleUSA.com
4
1. Labelling Mark
2. POWER: Compound key long press indicates that the monitor is standby
/switched ON. Short press indicates four split/DVR screen switching
3. MODE: Compound key short press indicates the loop switch of the split
mode 2 - split 3 - split 4/ln the DVR state. MODE can switch to playback
/video mode. Long press represents the conversion of the four division
and the DVR mode
4. CH1: It is the direct channel CH1 mode in split mode/In the four split
state, it is menu minus/the menu up in the DVR state/ the last page in DVR
video playback state, used to select videos.
5. CH2: The direct channel CH2 mode in split mode/It is menu plus in the
four split state/It is the menu down in the DVR state/ It is the next page in
the DVR video playback state, used to select videos.
6. Ch3: The direct channel 3 mode in split mode/down in the four split
status menu/left in DVR status menu/in DVR video, CH3 is the play button
7. Ch4: Direct channel 4 mode in split mode/It is up in the four split status
menu/It is right in the DVR status menul In DVR videos. CH4 indicates
pauses
8. Remote Control Window
REMOTE CONTROL
POWER: Standby/boot button.
you can achieve standby mode or boot mode
DVR/AV: Toggle the DVR mode and the four
split mode
MODE1: In DVR mode. Used for loop
switching of video/playback
SETUP: In DVR mode. you can open the DVR
settings menu
UP: Up direction
MUTE: Mute switch. No power amplier. no
support
LEFT: Left direction
Loading ...
Loading ...
Loading ...