Loading ...
Loading ...
Loading ...
4 5
1: Remove all contents in the box to ensure you
have all the pieces listed on Page 3.
2: Fully extend the Telescopic Pole, To do so, rst
open the clips and loosen the poles. Then, fully
extend the pole and close the clips on the pole to
lock in place (see Figure 2). Make sure the pole is
locked into place and cannot be pushed down.
NOTE:
To ensure a steady ow of steam through
the steam hose, the telescopic pole must be fully
extended when operating PureSteam Pro.
3: To attach the hanger attachment, align the tabs
on the hanger with the grooves on the pole and
push down (see Figure 3).
4: Insert the bottom of the telescopic pole into the
pole base (see Figure 4) so that the steam nozzle
holder faces the rear of the steamer (see Figure
1). Pointing the steam nozzle holder towards the
rear will ensure the stability of the steamer when
garments are hanging from the clothes hanger
hook
5: To attach the steam hose: Align the hose nut
with the steam hose base and turn the hose nut
clockwise to tighten the hose onto the base (see
gure 5),
CAUTION:
To prevent steam from causing bodily
injury or damage to surfaces, always hang the
steam nozzle on the nozzle holder when not in
use. Do not lay the steam hose on the floor as
condensation may occur and cause unwanted
water droplets in the steam.
CAUTION:
Pulling on the steam hose with
excessive force will damage it and may cause a
steam leak.
PRODUCT DIAGRAM
3 4
1: Steam Nozzle
2: Steam Handle
3: Steam Hose
4: Steam Hose Base
5: Steam Control Knob
6: Indicator
7: Pedal Switch
8: Wheels
9: Cord Wrap
10: Power Cord
11: Water Tank
12: Telescopic Pole
13: Hanger
14: Hook
15: Fabric Brush
ASSEMBLING PURESTEAM PRO
Figure 2
Figure 3
Figure 4
Figure 5
Figure 1
Loading ...
Loading ...
Loading ...