Loading ...
Loading ...
Loading ...
6
● If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the power
cable, and contact the service center.
● Use the device in conjunction with an UPS, and use factory recommended HDD if possible.
● For the device with fan blades or motors, keep body parts away from fan blades or motors.
Disconnect the power source during servicing.
● Do not touch the bare components (such as the metal contacts of the inlets) and wait for at least 5
minutes, since electricity may still exist after the device is powered off.
● Never place the device in an unstable location. The device may fall, causing serious personal injury
or death.
● If the device uses a 3-prong power supply plug, it must be connected to an earthed mains
socket-outlet properly.
Preventive and Cautionary Tips
Before connecting and operating your device, please be advised of the following tips:
● The device shall not be exposed to water dripping or splashing, and no objects filled with liquids,
such as vases, shall be placed on the device.
● No naked flame sources should be placed on the device, such as lighted candles.
● For the device with ventilation openings, the ventilation openings should not be impeded by
covering the ventilation openings with items, such as newspapers, table-cloths, and curtains. The
openings shall never be blocked by placing the device on a bed, sofa, rug, or other similar surface.
● The USB port of the equipment is used for connecting to a mouse, keyboard, USB flash drive, or
Wi-Fi dongle only. The current for the connected device shall be not more than 0.1 A.
● Under high working temperature (40 °C (104 °F) to 55 °C (131 °F)), the power of some power
adaptors may decrease.
● If the device needs to be installed on the wall or ceiling,
1. Install the device according to the instructions in this manual.
2. To prevent injury, this device must be securely attached to the installation surface in accordance
with the installation instructions.
● If a power adapter is provided in the device package, use the provided adapter only.
● If the device needs to be wired by yourself, select the corresponding wire to supply power
according to the electric parameters labeled on the device. Strip off wire with a standard wire
stripper at corresponding position. To avoid serious consequences, the length of stripped wire
shall be appropriate, and conductors shall not be exposed.
● Make sure that the power has been disconnected before you wire, install, or disassemble the
device.
● The device should be placed in a dry environment without corrosive gas (refer to the user manual
for details about corrosive gas).
HDD Installation for Most Chassis Types
Only certain models support HDD installation.
Type1
Type 2
Loading ...
Loading ...
Loading ...