Hikvision DS-2CD2545FWD-IS ~ EOL Hikvision Network Camera User Manual

Loading ...

2) Go to Conguraon → Local , set Rules to Enable.

Set Sensivity. The lower the sensivity is, the prole of the face or unclear face is more dicult

to detect.

Set the arming schedule and linkage methods. For the informaon about arming schedule

sengs, see Set Arming Schedule . For the informaon about linkage methods, see Linkage

Method Sengs .

Click Save.

6.2.5 Set Video Loss

This funcon can detect the video signal loss in me and trigger the linkage acon.

Steps

Go to Conguraon → Event → Basic Event → Video Loss .

Check Enable.

Refer to Set Arming Schedule for seng scheduled me. Refer to Linkage Method Sengs for

seng linkage method.

Click Save.

6.2.6 Set Intrusion Detecon

It is used to detect objects entering and loitering in a pre-dened virtual region. If it occurs, the

device can take linkage acons.

Steps

Go to Conguraon → Event → Smart Event → Intrusion Detecon .

Check Enable.

Select a Region. For the detecon region sengs, refer to Draw Area .

Set rules.

Sensivity Sensivity stands for the percentage of the body part of an acceptable target

that enters the pre-dened region. Sensivity = 100 - S1/ST × 100. S1 stands

for the target body part that goes across the pre-dened region. ST stands for

the complete target body. The higher the value of sensivity is, the more

easily the alarm can be triggered.

Threshold Threshold stands for the threshold for the me of the object loitering in the

region. If the me that one object stays exceeds the threshold, the alarm is

triggered. The larger the value of the threshold is, the longer the alarm

triggering me is.

Detecon

Target

Human and vehicle are available. If the detecon target is not selected, all the

detected targets will be reported, including the human and vehicle.

Network Camera User Manual

Loading ...

Hikvision DS-2CD2545FWD-IS ~ EOL DS-2CD2545FWD-IS 4MP IR Fixed Mini Dome Network Camera