Loading ...
Loading ...
Loading ...
2N TELEKOMUNIKACE a.s., www.2n.cz 262/319
2.4 Extending Module Connection
2N IP Verso
®
allows you to connect the following extending modules:
Infopanel
Keypad
Touch Keypad
RFID Card Reader 125 kHz
RFID Card Reader 13.56 MHz NFC Support
Secured RFID Card Reader 13.56 MHz NFC Support
Bluetooth & RFID reader 125kHz, 13.56MHz, NFC
Bluetooth & RFID reader 125kHz, secured 13.56MHz, NFC
Touch keypad & RFID reader 125kHz, 13.56MHz, NFC
Touch keypad & RFID reader 125kHz, secured 13.56MHz, NFC
Bluetooth Reader
Touch Display
Induction Loop
Fingerprint Reader
I/O Module
5-Button
Wiegand Module
Tamper Switch
Blind Panel
Security Relay
Module Bus Interconnection
All the modules, except for the Tamper Switch, are interconnected via a 2N
®
IP Verso
bus. The bus starts on the main unit and goes over all the modules. The order of
modules on the bus is irrelevant. And it also irrelevant which bus connector on the
module is used as the input and which is used as the output.
The modules include a 220 mm long interconnecting cable; the Wiegand (9155037)
and I/O modules (9155034) include an 80 mm long interconnecting cable.
You can order a separate 1 m long bus cable (9155050) for remote installation of the
modules. Typically, it helps install an RFID card reader on the opposite 2N
®
IP Verso
side of the wall on which the intercom is installed.2N
®
IP Verso
Loading ...
Loading ...
Loading ...