Loading ...
Loading ...
Loading ...
Network Camera User Manual
49
Sensitivity
Range [1-100]. It stands for the percentage of the body part of an
acceptable target that leaves the pre-defined region.
Sensitivity = 100 – S1/ST*100
S1 stands for the target body part that leaves the pre-defined region.
ST stands for the complete target body.
Example: If you set the value as 60, a target is possible to be counted
as a removed object only when 40 percent body part of the target
leaves the region.
Threshold
Range [5-100s], the threshold for the time of the objects removed
from the region. If you set the value as 10, alarm is triggered after the
object disappears from the region for 10s.
Figure 6-9 Set Rule
5. Optional: Repeat the above steps to set more regions.
6. For the arming schedule settings, see Set Arming Schedule. For the linkage method settings, see
Linkage Method Settings.
7. Click Save.
Note
The function is only supported by certain models. The actual display varies with the models.
6.2.12 Draw Area
This section introduces the configuration of area.
Steps
1. Click Draw Area.
Loading ...
Loading ...
Loading ...