Loading ...
Loading ...
Loading ...
LT-3300 Dimmer/Switch
5
Preparing for Installation:
The LT-3300 is an extremely versatile lighting control devices, and it can be congured in many different ways to meet your
installation requirements. There are a few items to keep in mind as you prepare for the installation.
• Will the LT-3300 be used as a ON/OFF switch or a Dimmer? The LT-3300 can be congured as a on/off controller or it
can be congured as a device that can brighten/dim a lighting load. By default the LT-3300 is set as a On/Off switch for
safety reasons, but it can be changed in the URC software after the LT-3300 has been included into the Z-Wave
network.
• Does the installation have a ‘neutral’ wire (AC Power Type)? The LT-3300 can be used in a neutral or non-neutral wiring
installation regardless if it is in on/off switch mode or dimmer mode. For installations where no neutral wire is present,
you may need to install a special bypass to prevent ickering and/or to keep your LT-3300 powered. The LT-3300 will
automatically detect if it is connected to a neutral wire or not, so there is no need congure this functionality.
• Is it a Single-Pole or Multi-Way (3+Way) Installation? The LT-3300 can be used in a Multi-Way installation, where more
than one light switch is controlling a single lighting load. You will need to use a LT-3300 at each location where the
lighting load should be controlled from. This type of installation will require a neutral wire to be used to the LT-3300’s
controlling the lighting load. All the LT-3300s will need to be included into the Z-Wave network, and then associated
together from within the URC software.
• Will the LT-3300 be used as a ‘Scene Controller’? The LT-3300 can be used as a scene controller either connected to a
lighting load, or as a stand alone device connected to AC power. The LT-3300 can have up to 15 different scenes
assigned to it based on the number of times the up / down button is pressed, or press and hold / released. There is also
a scene that can be assigned to the ‘Conguration’ button. Assigned scenes are not just for lighting control, any action
programmed within the URC system can be assigned as a scene to be triggered from the LT-3300.
• Example: Double tap the “Down Button” to turn off the lights and the Audio/Video gear in the room.
• Example: Press the “Cong Button” on the LT-3300 by the bed to activate the “Good Night” scene that locks all the
doors, shuts the garage doors, adjusts all the lights, closes the shades, sets the temperature on the thermostat, arms
the security system, and turns the audio/video gear off in rooms that are not being used.
Loading ...
Loading ...
Loading ...