Loading ...
Loading ...
Loading ...
8
ASSEMBLY
INSTALLING THE CUTTING HEAD SHIELD
TB25C EC
1. Remove the wing nut and washer from the cutting head shield.
2. Insert the short tab (the one without a hole) on the mount
bracket into the slot on the cutting head shield (Fig. 1).
3. Rotate the cutting head shield counterclockwise to align the hole
on the cutting head shield with the hole on the mount bracket
(Fig. 1).
4. Insert the square bolt into the
hole undern
eath the cutting head
shield (Fig. 2). Push the square bolt through the cutting head
shield and mount bracket.
5. Place the washer onto the square bolt (Fig. 2).
6. Screw the wing nut onto the square bolt until the cutting head
shield is firmly in place (Fig. 2).
Fig. 1
Mount Bracket
Cutting Head
Shield
WARNING:
To prevent serious personal injury, never
operate the unit without the cutting head shield in place.
Fig. 2
Washer
Square Bolt
Slot
Wing Nut
Cutting Head
Shield
Mount Bracket
INSTALLING THE CUTTING HEAD SHIELD
TB25S EC
1. Remove the wing nut and washer from the cutting head shield.
2. Insert the short tab (the one without a hole) on the mount
bracket into the slot on the cutting head shield (Fig. 3).
3. Rotate the cutting head shield until the bolt on the cutting head
shield protrudes through the hole on the mount bracket (Fig. 3).
4. Place the washer onto the bolt (Fig. 4).
5. Scr
ew the wing nut onto the bolt until the cutting head shield is
f
irmly in place (Fig. 4).
WARNING:
To prevent serious personal injury, never
operate the unit without the cutting head shield in place.
Fig. 3
Mount Bracket
Cutting Head
Shield
Fig. 4
Washer
Bolt
Slot
Wing Nut
Tab
Bolt
Hole
Loading ...
Loading ...
Loading ...