Loading ...
Loading ...
Loading ...
9
• Pre-heat the waffle maker 5 to 7 minutes by turning the browness selector to the desired setting (2).
The green light (3) will light up accompanied by a beep, when the waffle maker reaches the desired
cooking temperature.
( For the pre-heating, place the thermostat selector on the chosen cooking position ).
• Each time the waffle maker is used, wait until the green light comes on before pouring batter into
the waffle maker plates.
• Close the waffle maker during the cooking cycle. Do not lock the safety catches on the sides of the waffle maker
when cooking.
• At the back of the waffle maker there is a unique batter tray
(A)
. This tray catches any excess batter.
We recommend emptying this tray when the waffle maker is cold. Use oven mitts if the tray must be emptied
while the appliance is hot and in use
(6)
.
Once the cooking cycle is complete the beep will again sound to let you
know the waffles are ready.
.
• Clean the back of the waffle plates between cooking operations. Use a nonstick safe kitchen ustensil to remove extra
batter from around the back of the waffle plates
(8) and
to remove the waffle from the waffle maker.
• CAUTION: To avoid any risk of injury or accident, check the cord and waffle maker prior to each use.
Do not use the waffle maker if the cord and/or the appliance itself are damaged or are not operating correctly.
• Use the locks to store the waffle maker in a vertical position (10) or when moving the waffle maker.
CLAD-WAF4-NC00118060_CLAD-WAF4-NC00118060 21/02/13 16:37 Page9
Loading ...
Loading ...
Loading ...