Loading ...
Loading ...
Loading ...
23
CHECKING FOR LEAKS:
CAUTION:
Note:
The leak test must be performed in an area that has adequate ligh�ng in order to see if bubbles are developing and not in a windy or noisy
area so larger leaks can be detected by smell or sound.
Strong odors, colds, sinus conges�on, etc. May prevent the detec�on of propane by smell. Use cau�on
and common sense when tes�ng for leaks.
1. Create a mixture of 50% water and 50% liquid dishwashing soap.
2.
Open the lid.
3. Ensure all control knobs are set to the ‘ OFF ’ posi�on.
4. Turn on the gas at the cylinder valve. Turn the cylinder valve knob counter
clockwise un�l fully opened. If you
hear a rushing sound or smell gas, turn the gas off. Tighten any leaking connec�ons. If leak is detected at
connec�on nut and �ghtening does not stop leak, re
inspect propane tank rubber seal.
5. Create a mixture of 50% water and 50% liquid dishwashing soap.
6.
Open the lid.
7. Ensure all control knobs are set to the ‘ OFF ’ posi�on.
8. Turn on the gas at the cylinder valve. Turn the cylinder valve knob counter
clockwise un�l fully opened. If you hear a
rushing sound or smell gas, turn the gas off. Tighten any leaking connec�ons. If leak is detected at connec�on nut and
�ghtening does not stop leak, re
inspect propane tank rubber seal.
9.
Apply the soapy water mixture to the following:
A Supply tank(cylinder) welds. B Connec�on nut to tank valve.
C Back side of connec�on nut to brass nipple. D Brass nipple connec�on into regulator.
E Regulator connec�ons to gas supply hoses. F Hose connec�on to gas manifold.
G
The full length of gas supply hose. H Tank valve to cylinder.
10. Check each place listed(A
H) for growing bubbles, which indicates a leak. Large leaks may not be detected by
bubbles but should produce a rushing sound or gas smell.
11. Turn off gas supply at cylinder valve.
12.
Turn on control knobs to release gas pressure in hose.
13. Turn control knobs to ‘ OFF ’ posi�on.
14. Tighten any leaking connec�ons. If leak is detected at connec�on nut and �ghtening does not stop leak, re
inspect
propane tank rubber seal.
15. Repeat soapy water test un�l no leaks are detected.
16. Turn off gas supply at cylinder valve un�l you are ready to use your pizza oven.
17. Wash off soapy residue with cold water and towel dry.
18. Wait 5 minutes to allow all gas to evacuate the area before ligh�ng pizza oven.
FOR MORE DETAILS AND INFORMATION, PLEASE VISIT OUR WEBSITE WWW.KUCHT.COM
Loading ...
Loading ...
Loading ...