Loading ...
Loading ...
Loading ...
Figure 2-25 Finish Installation
2.4 Installation of Type V Camera
2.4.1 Ceiling Mounting
Steps:
1. Paste the drill template (supplied) to the installation
location.
2. (Optional) For cement ceiling, drill the screw holes
with a 5.5 mm drill and insert the supplied wall
plugs.
3. Rotate the camera counterclockwise to remove the
trim ring.
Figure 2-26 Remove Trim Ring
4. Install the camera to ceiling.
iv. Secure the installation plate to the ceiling with
three PA4 × 25 screws (supplied).
v. Install the trim ring.
vi. Turn the camera as the figure below until it snaps
into the installation plate.
Figure 2-27 Install the Camera to Ceiling
5. Connect the cables.
6. Power on the camera to adjust the view angle
according to the figure below.
Pan Position
[0° to 360°]
Rotation Postion
[0° to 360°]
Figure 2-28 3-Axis Adjustment
1). Rotate the enclosure to adjust the pan position
[0° to 360°].
Loading ...
Loading ...
Loading ...