Loading ...
Loading ...
Loading ...
20
4. Repeat the steps 6 to 9 of the 2.1.1 Ceiling Mounting section
to complete the installation.
2.1.5 Mounting with Inclined Base of Type I Camera
Note:
You need to purchase an inclined base separately if you adopt
the mounting with an inclined base.
Steps:
1. Drill 4 screw holes in the ceiling according to the holes of the
inclined base.
2. Install the inclined base to the ceiling with supplied screws, as
shown in Figure 2. 11.
Figure 2. 11 Fix the Inclined Base
3. Route the cables through the hole of the inclined base.
4. Attach the back box of type I camera/base plate of type II
camera to the inclined base with the supplied screws.
Loading ...
Loading ...
Loading ...