Liebherr LBREFFR3636 Side-by-Side Column Refrigerator & Freezer Set with 36 Inch Refrigerator and 36

Design Guide - Page 28

For LBREFFR3636.

PDF File Manual, 35 pages, Read Online | Download pdf file

LBREFFR3636 photo
Loading ...
Loading ...
Loading ...
36" Monolith French Door
* If a shaker style panel is used, which is thinner than the minum panel thickness, shorter screws than those supplied in the accessory pack must be used.
C
Product Dimensions
Individual Toe Kick
Cut out Dimensions
Door Panel Dimensions
and dimensions of free length for power
Continuous Toe Kick
54 55
Available Accessories
· Stainless steel panel set
· Monolith brushed aluminum square handle
· Monolith stainless steel round handle
· Monolith brushed aluminum soft-edge handle
· Stainless steel Toe Kick
See pages 56–59 for available accessories for
single units and Side-by-Side combinations.
* Estimated energy cost will depend on utility rates and use.
Estimated energy cost based on a national average electricity cost of 12 cents per KWh.
* *Noise output – according to EN 60704-3.
MCB 3652
84"
(2134 mm)
4"
(102 mm)
36"
(914 mm)
A
B
13 3
2 /16" - 4
/16"
(72 - 106 mm)
3"
(76 mm)
3"
(76 mm)
DD
C
E
84"
(2134 mm)
36"
(914 mm)
A
B
3"
(76 mm)
3"
(76 mm)
DD
C
E
A
Cabinet depth frameless installation style = 25" (635 mm)
Cabinet depth inset installation style = 25" (635 mm) +
panel thickness
B
At this point the power cord exits from the appliance
rear. 3/4" (19 mm) from the left and 5" (127 mm) from
the floor. Free length of the power cord is 98" (2.5 m).
C
The appliance has a recess in this area for cable and
waterline laying. 1" (25 mm) in depth and 5 1/2" (140 mm)
in height over the whole width of the appliance.
D
This surface is visible when the appliance door is open.
Designed finish is required.
E
The anti-tipping bracket is positioned at the base of
the appliance and must be secured to the wall or to the
floor, please refer to the installation manual for more
information.
(2126 mm)
3
83 /4"
(65 mm)
9
2 /16"
(96 mm)
3
3 /4"
(610 mm)
24"
(906 mm)
11
35 /16"
36" recess
Inset installation style
H1 = 49 3/8" (1255 mm)
H2 = 30 1/4" (768 mm)
HS = 1/4" (6 mm)
W1 = 17 3/4" (451 mm)
W2 = 35 3/4" (908 mm)
Frameless installation style
H1 = 49 1/2" (1258 mm)
Add overlapping dimension to
the panel on the top.
H2 = 30 1/4" (768 mm)
HS = 1/4" (6 mm)
W1 = 17 7/8" (454 mm)
Add overlapping dimension to
the panel on the outer sides.
W2 = 36" (914 mm)
Add overlapping dimension to
the panel on both sides.
W 1
H 1
H 2
W 1
W 2
HS
HS
~
8.8 ft (2400 mm)
~
5 ft (1550 mm)
Panel thickness: Min. 5/8" (16 mm)* / Max. 1" (25.4 mm)
Panel and handle weight 1: Max. 88 lbs. (40 kg)
Panel and handle weight 2: Max. 66 lbs. (30 kg)
36
1
2
1
Energy consumption (kWh / y)
Estimated Yearly Energy Cost in US $
Sound rating dB(A)
Total capacity cu.ft. (l)
Refrigerator capacity cu.ft. (l)
BioFresh-Plus compartment cu.ft. (l)
Freezer capacity cu.ft. (l)
Number of shelves
Number of door racks
Number of freezer drawers
Electronic control
Refrigerator temperature range °F (°C)
Freezer temperature range °F (°C)
Defrost type
Interior light
Internal Water Dispenser
Water filter
IceMaker
Ice cube output lbs. (kg) / 24h
Ice cube stock lbs. (kg)
Door hinges
Product dimensions
in inch (H / W / D)
in cm (H / W / D)
Cut out dimensions
in inch (H / W / D)
in cm (H / W / D)
Net weight lbs. (kg)
Voltage V / Hz
40**
14.9 (423)
8.4 (239)
3 (86)
6.5 (184)
3
4
2
InfinitySwipe
+36 °F to +45 °F (+2 °C to +7 °C)
+7 °F to −17 °F (−14 °C to −27 °C)
automatic
InfinityLight
InfinitySpring
yes
fixed water connection
3.5 (1.6)
6.6 (3)
left fix / right fix
83 3/4" / 35 11/16" / 24"
212.6 / 90.6 / 61
84" / 36" / 25"
213.4 / 91.4 / 63.5
418.9 (190)
115/60
Inset
A = 8 1/4" (210 mm)
B = 1/2" (12.5 mm)
C = 20 1/16" (510 mm)
Frameless
A = 8 1/4" (210 mm)
B = 1/2" (12.5 mm)
C = 20 1/16" (510 mm)
D = 15 3/4" (400 mm)
Dimension A = without
mounted door handle
35
11
/
16" (906 mm)
IMPORTANT!
Stated minimum height dimensions
include when the leveled feet are fully
inserted.
Height can be increased by a maximum of
3/4" (19 mm) by turning the adjustable feet.
When the appliance is fitted in the recess,
the appliance must be raised by turning the
adjustable feet so that the appliance top
has contact with the anti-tipping bracket.
This results in a 4" (102 mm) Toe Kick height.
Width will increase by 1/4" (6.5 mm) when
mounting strips are installed.
67 *
561
Loading ...
Loading ...
Loading ...