Loading ...
Loading ...
Loading ...
5
PRESET Stations
To set the PRESET stations:
1. Tune to desired station.
2. Press and hold the PRESET button until the
PRESET indicator on the display begins to ash.
3. Use the
buttons to select the PRESET
location for the station. Nine locations (1-9) are
available.
4. Press the PRESET button to save the location.
To tune to a PRESET station:
Press and release the PRESET button to step
through the PRESET stations.
Using Bluetooth
®
To enter the Bluetooth
®
mode, press the
button.
Pairing
• If no Bluetooth
®
device is connected, Bluetooth
®
pairing will begin automatically and the icon will
ash on the display.
• The radio will continue to search for a signal for
3 minutes.
• To manually pair a device, press and hold the
Bluetooth
®
button until the begins to ash.
• While the is ashing, select "M18 Jobsite Radio"
on the Bluetooth
®
capable device.
• Once the device has successfully paired with the
radio, a tone will play and the icon will be shown
on the radio's display.
Connecting
To enter the Bluetooth
®
mode, press the button.
When the radio locates a paired Bluetooth
®
device,
the will be shown on the radio's display.
If connection is lost between the radio and the
Bluetooth
®
device, the radio will try to reconnect
automatically for up to 3 minutes.
Controlling
When streaming music through to the radio via a
Bluetooth
®
device, use the
button to start and
pause the music. Use the buttons to move
through the tracks.
MAINTENANCE
WARNING
To reduce the risk of injury, always
unplug the charger and remove the
battery pack from the charger or tool before
performing any maintenance. Never disassemble
the battery pack, charger, or tool, except as pro-
vided in these instructions. Contact a MILWAUKEE
service facility for all other repairs.
Maintaining Tool
Keep your tool, battery pack and charger in good
repair by adopting a regular maintenance program.
Inspect your tool for issues such as undue noise,
misalignment or binding of moving parts, breakage
of parts, or any other condition that may aect the
tool operation.
If the tool does not start or operate at full power with
a fully charged battery pack, clean the contacts on
the battery pack. If the tool still does not work prop-
erly, return the tool, charger and battery pack, to a
MILWAUKEE service facility for repairs.
WARNING
To reduce the risk of personal in-
jury and damage, never immerse
your tool, battery pack or charger in liquid or
allow a liquid to ow inside them.
Cleaning
Clean dust and debris from any vents. Keep tool
clean, dry and free of oil or grease. Use only mild
soap and a damp cloth to clean, since certain clean-
ing agents and solvents are harmful to plastics and
other insulated parts. Some of these include gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household deter-
gents containing ammonia. Never use ammable or
combustible solvents around tools.
Repairs
For repairs, return the tool, battery pack and charger
to the nearest authorized service center.
ACCESSORIES
WARNING
Use only recommended accesso-
ries. Others may be hazardous.
For a complete listing of accessories, go online to
www.milwaukeetool.com or contact a distributor.
SERVICE - UNITED STATES
1-800-SAWDUST (1.800.729.3878)
Monday-Friday, 7:00 AM - 6:30 PM CST
or visit www.milwaukeetool.com
Contact Corporate After Sales Service Technical
Support with technical, service/repair, or warranty
questions.
Email: [email protected]
Become a Heavy Duty Club Member at
www.milwaukeetool.com to receive important
notications regarding your tool purchases.
Loading ...
Loading ...
Loading ...