Loading ...
Loading ...
Loading ...
Fig. 24
u
Pull the bearing bush out of the guide. Fig. 24 (1)
u
Swing the cable holder out. Fig. 24 (2)
Fig. 25
u
Remove the cable with the cable holder from the
bearing bracket. Fig. 25 (3)
Fig. 26
u
Insert the cable mirror-inverted in the upper groove
of the cable holder.
w
The middle marking must be positioned on the edge
of the cable holder Fig. 26 (1).
u
Swing the cable holder in.
Fig. 27
u
Insert from the other side and latch into place.
NOTICE
Danger of crushing the cable
u
Pay attention to the markings when routing the
cable. The cable end with the double marking must
be routed into the door end piece.
Fig. 28
After making the change, the cable routing must look
as shown in the illustration.
Reversing the door
14 * Depending on model and options
Loading ...
Loading ...
Loading ...