Loading ...
Loading ...
Loading ...
9
WARNING: The shipping brace, used
for packaging purposes only, must be
removed and discarded before operating
your riding mower.
WARNING: The mowing deck is capable
of throwing objects. Failure to operate the
riding mower without the discharge cover
in the proper operating position could
result in serious personal injury and/or
property damage.
Figure 3-3
3
Attaching The Steering Wheel
The hardware for attaching the steering wheel has been
packed within the steering wheel, beneath the steering
wheel cap. Carefully pry off the steering wheel cap and
remove the hardware.
NOTE: There are two different styles of steering wheel
cap. See Fig. 3-3. Styles vary by model.
1. With the wheels of the tractor pointing straight
forward, place the steering wheel over the steering
shaft.
2. Place the washer over the steering shaft and secure
with the hex bolt. See Fig. 3-3.
3. Place the steering wheel cap over the center of the
steering wheel and push downward until it “clicks” into
place.
Gas and Oil Fill-up
The gasoline tank is located under the hood and has a
capacity of three gallons. Do not overfill.
WARNING: Use extreme care when
handling gasoline. Gasoline is extremely
flammable and the vapors are explosive.
Never fuel machine indoors or while the
engine is hot or running. Extinguish ciga-
rettes, cigars, pipes, and other sources of
ignition.
Service the engine with gasoline and oil as instructed in
the separate Engine Operator/Owner Manual packed with
your tractor. Read instructions carefully.
IMPORTANT: Your tractor is shipped with motor oil in the
engine. However, you MUST check the oil level before
operating. Be careful not to overfill.
Shipping Brace Removal
WARNING: Make sure the riding mower’s
engine is off, remove the ignition key, and
set the parking brake before removing the
shipping brace.
• Locate the shipping brace, if present, and accompany-
ing warning tag found on the right side of the mower,
between the discharge chute and the cutting deck.
See Fig. 3-4.
• While holding the discharge chute with your left hand,
remove the shipping brace with your right hand by
grasping it between your thumb and index finger and
rotating it clockwise.
WARNING
Make sure the riding
mower’s engine is
off, remove the igni-
tion key, and set the
parking brake before
removing the shipping
brace.
Setting Up
Your Lawn
Tractor
The shipping brace,
used for packaging
purposes only, must
be removed and
discarded before
operating your riding
mower.
The mowing deck is
capable of throwing
objects. Failure to
operate the riding
mower without the
discharge cover in
the proper operating
position could result
in serious personal
injury and/or property
damage.
Figure 3-4
Loading ...
Loading ...
Loading ...