Loading ...
Loading ...
Loading ...
User Manual
1
Chapter 1 Device Activation
To protect the security and privacy of the user account and data, you should set a login password to activate the
device when access the device via network.
Note
Refer to the user manual of the software client for the detailed information about the client software activation.
1.1 Activate the Device via SADP
Search and activate the online devices via SADP software.
Before You Start
Access www.hikvision.com to get SADP software to install.
Steps
1. Connect the device to network using the network cable.
2. Run SADP software to search the online devices.
3. Check Device Status from the device list, and select Inactive device.
4. Create and input the new password in the password field, and confirm the password.
Caution
We highly recommend you create a strong password of your own choosing (using a minimum of 8 characters,
including upper case letters, lower case letters, numbers, and special characters) in order to increase the
security of your product. And we recommend you reset your password regularly, especially in the high
security system, resetting the password monthly or weekly can better protect your product.
5. Click OK.
Device Status changes into Active.
6. Optional: Change the network parameters of the device in Modify Network Parameters.
1.2 Activate the Device via Browser
You can access and activate the device via the browser.
Steps
1. Connect the device to the PC using the network cables.
2. Change the IP address of the PC and device to the same segment.
Note
The default IP address of the device is 192.0.0.64. You can set the IP address of the PC from 192.0.0.2 to
192.0.0.254 (except 192.0.0.64). For example, you can set the IP address of the PC to 192.0.0.100.
3. Input 192.0.0.64 in the browser.
Loading ...
Loading ...
Loading ...