Loading ...
Loading ...
Loading ...
Operating Your Heater
Check that the heat control switch is set to Off position before plugging the
heater into the mains supply.
HEAT CONTROL SWITCH
The control switch positions are:
'I' = Low Heat
'II' = Medium Heat
'III' = High Heat
= High Heat with Turbo Fan
For greater economy, use the High Heat setting initially and then switch to the
Low Heat setting.
THERMOSTATIC CONTROL
1. Rotate thermostat knob clockwise until you reach the maximum position.
2. When the room reaches a temperature that is comfortable for you, slowly
turn the knob anti-clockwise until the heater just turns off (you will hear a
click).
3. The heater will now cycle on and off to maintain the comfort level you have
set.
4. Take note of this setting position for future use.
NOTE: Two elements will still stay on when the thermostat has activated.
Note: When the thermostat activates you may see a small flash of light (may look
like a spark) from inside the heater. This is normal and there is no cause for
concern.
Loading ...
Loading ...
Loading ...