Loading ...
Loading ...
2
Speaker Installation:
The SP-OD6 is supplied with a U-shaped mounting bracket that can be installed either
vertically or horizontally. Use the speaker’s retention knobs to screw the top and bottom
of the mounting bracket to the speaker.
The speaker terminal on the SP-OD6 is covered in a rubber film. When wiring the
speaker, assure that no exposed wires or materials are left on the speaker terminal.
After mounting the bracket, loosen the retention knobs on both sides of the speaker and
slide the speaker onto the bracket. Then tighten the retention knobs to secure in place.
Angle Adjustment:
To adjust the speaker angle, loosen the retention knobs on the sides of the speaker and
rotate the speaker to the desired angle. It is recommended that speakers are angled
towards the listening area. Once adjusted, tighten the retention knobs to secure the
speaker in place.
Loading ...
Loading ...
Loading ...