Loading ...
Loading ...
Loading ...
Instructions
8
be connected by a supply cord
fitted with:
1 An appropriate rated plug that is
compatible the socket-outlet fitted
to the final sub-circuit in the fixed
wiring that supplies this cooker.
2 An appropriate rated installation
male connector that is compatible
with the installation female con-
nector fitted to the final sub-circuit
in the fixed wiring that supplies the
cooker.
• If required, use a pressure
regulator that complies with
current regulations.
• After carrying out any operation,
check that the tightening torque of
gas connections is between 10 Nm
and 15 Nm.
• At the end of the installation, check
for any leaks with a soapy
solution, never with a flame.
• Have the electrical connection
performed by authorised
technical personnel.
• If the range is not fitted with a
flexible cord, the instruction
manual must clearly state the type
and size of cord to be used.
• The instruction manual must
include details indicating the
correct installation and use of the
baking tray and shelves.
• The appliance must be connected
to earth in compliance with
electrical system safety standards.
• Use cables withstanding a
temperature of at least 90°C.
• The tightening torque of the screws
of the terminal supply wires must
be 1.5 - 2 Nm.
• Before installation, make sure that
the local gas supply (gas type
and pressure) and the settings of
the domestic appliance are
compatible.
• The settings for this domestic
appliance are shown on the gas
setting label.
• This domestic appliance is not
connected to a device for
extracting combustion products. It
must be installed and connected
in accordance with current
installation regulations. Pay
particular attention to the relevant
requirements regarding
ventilation.
Loading ...
Loading ...
Loading ...