Loading ...
Loading ...
Loading ...
13.1 Taking off the soft stop mecha‐
nism
Fig. 7
u
Open the door.
NOTICE
Risk of damage!
If the door seal is damaged the door may not close
properly and the level of cooling is insufficient.
u
Do not damage the door seal with the screwdriver!
u
Remove the outer cover. Fig. 7 (1)
u
Disengage and release the bearing bracket cover.
Remove the bearing bracket cover. Fig. 7 (2)
u
Unlatch the panel with a slotted screwdriver and
swivel it to one side. Fig. 7 (3)
Fig. 8
CAUTION
Crushing hazard from the folding bracket!
u
Engage the locking device.
u
Engage the locking device in the opening. Fig. 8 (1)
u
Unscrew the bolt with a screwdriver. Fig. 8 (2)
u
Remove the bolt upwards. Fig. 8 (3)
u
Turn the hinge in the direction of the door. Fig. 8 (4)
Fig. 9
u
Unlatch the cover with a slotted screwdriver and lift
it up. Fig. 9 (1)
u
Take out the cover. Fig. 9 (2)
Fig. 10
u
Loosen the soft stop unit screw with a T15 screw‐
driver approx. 14 mm (0.55 in). Fig. 10 (1)
Reversing the door
* Depending on model and options 9
Loading ...
Loading ...
Loading ...