Loading ...
Loading ...
Loading ...
EN-12
To switch auto repeat timing and the progress beeper on and off
1. Hold down A while in the Timer Mode. The hour digits flash on the display
because they are selected. Press A again to move the flashing to the auto repeat
ON/OFF setting.
2. Press B or D to toggle auto repeat on (
) and off.
3. Press C to move the flashing to the progress beeper ON/OFF setting.
4. Press B or D to toggle the progress beeper on (
) and off.
5. Press A to return to the Timer Mode.
• When the end of the countdown is reached while auto repeat is on, the alarm
sounds, but the countdown restarts from the beginning without stopping. You
can stop the countdown by pressing D and manually reset to the start time by
pressing B.
• If you set a starting time of 10 seconds or less and have Auto Repeat turned on,
the countdown timer tone (which normally sounds for 10 seconds) sounds for only
one second.
• When the progress beeper is turned on, the watch beeps as the countdown time
passes the 10, 5, 4, 3, 2, and 1-minute marks, and the 50, 40, 30, 20, 10, 5, 4, 3, 2,
and 1-second marks.
Loading ...
Loading ...
Loading ...