Loading ...
Loading ...
Loading ...
www.PyleUSA.com
8
Troubleshooting
Q: Unit doesn’t power up.
A: Use a multi-meter to check for 12v+ to red and yellow wires. Check for proper Ground on the Black wire.
Q: My video does not play.
A: Attach “PARK” wire to parking break. When this wire is grounded the video will play
(Grounding trigger of the parking brake)
Q: Reverse camera does not come up on the screen.
A: Attach “BACK UP CAMERA” wire to reverse tail light 12v+ (Make sure camera is and sending video signal)
Q: Can I set up steering wheel control?
A: Key 1 and Key 2 wires need to be wired to your vehicle’s steering wheel column
Q: The time I set is not saved after device reboot.
A: Are other setting saved? If not: Check that yellow memory wire is attached to 12v+ constant
A: Turn o GPS auto update
Go to radio settings > Set Time > switch o auto update
Q: My GPS gets no reception.
A: Check if the antenna properly connected.
A: Mount Antenna directly to your vehicle (GPS antenna is to be magnetically mounted, it will boost GPS
reception when attached)
A: Check alternate antenna placement to test for interference
Q: How to I set the time?
A: System setting, set time
Q: How do I turn up GPS instruction volume (I Can’t hear it over music)
A: Change GPS sound settings
Go to Navi > Settings > Sounds > Set GPS voice level to max > Set radio volume to min (Adjust accordingly)
Q: Where can I download rmware updates?
A: This unit’s hardware does not allow it to be updated with new OS or rmware.
Q: How do I play video les? My unit cannot read my digital video les.
A: Make sure SD card is compatible
A: Check le format of your le. (You may need to convert your video le to an alternate le format)
You have entered the 'Touch Screen Calibration Menu'. For optimum touchscreen performance, this
feature enables you to enjoy the best functionality of your device's touch screen.
To complete the touchscreen calibration, an "X" will appear in the circles on the screen in numbered
order, continue to press the center of the "X" as it passes through each numbered circle.
(In circle number one, you will see an "X", touch the center of the "X", then the "X" will move to circle
number two. Continue to touch the center of the "X" as it will move to the other circles in numbered order.
If calibration senses an error, the process may restart; Repeat if necessary.)
Loading ...
Loading ...
Loading ...