Loading ...
Loading ...
Loading ...
10
• When moving the snow thrower, use the wheels on one side as the pivot point. Slightly tilt the snow
thrower on this pivot point to move it forward or backward.
• Start your clearing path outward, throwing snow in a back and forth motion. To clear in the opposite
direction, pivot the snow thrower on its wheels. Make sure to overlap clearing paths.
• Note the wind direction. If possible, move in the same direction as the wind so that the snow is not
thrown against the wind (and thus back onto you and on the just cleared path).
• Do not push the snow thrower with excessive force. You should push the machine gently and at a
consistent speed in accordance with the unit's throw rate.
• Some parts of the snow thrower may freeze under extreme temperature conditions. Do not attempt to
operate the snow thrower with frozen parts. If the parts freeze while the snow thrower is in use, stop
the snow thrower, remove the battery, and inspect for frozen parts. Free all parts before restarting or
operating the snow thrower. Never force controls that are frozen.
• When working on pebbles, gravel, or unpaved surfaces, avoid throwing loose surface material along
with the snow by pushing down on the handle to raise the scraper at the base of the unit above the
pebbles or gravel.
• Cold Weather Operation: Lithium Ion batteries can be safely used from temperatures ranging from -
17 degrees to 45 degrees Celsius. NOTE: Do not store or charge battery outside. Battery must be
charged and stored indoors prior to use of the snow thrower.
• If the Snow thrower does not start initially remove battery from snow thrower. Place battery on
charger and allow to charge for 10 minutes. Remove from charger and install in Snow thrower for use.
The start-up issue may be caused from the battery being too cold. To avoid this issue, ensure battery is
stored in a dry cool place for storage and charging and leave indoors until ready for use.
MAINTENANCE
SERVICING
Servicing should be performed by a qualified technician. Replacement parts for this snow
thrower must be identical to the parts that they replace. If repairs are necessary, contact the
toll-free helpline, at 1-800-791-9458.
Note: Identify the left and right sides of the snow thrower when standing in the normal operating
position.
WARNING ：If the battery pack is installed into the snow thrower, the snow thrower could
start accidentally while the operator is performing maintenance on it, which could cause
serious personal injury. Remove the battery pack before performing any maintenance.
SRORAGE
• Run the snow thrower for a few minutes in order to melt any snow that may be left on the snow
thrower.
• Wipe the snow thrower off with a dry cloth before storage. This will help prevent ice building
up on the unit and parts freezing.
• Remove the battery and store it in a cool dry location, if possible. Charge the battery every six
months when not in use in order to increase its life.
• Inspect the snow thrower thoroughly for worn, loose, or damaged parts. If any parts must be
repaired or replaced, contact the Toll-Free Helpline, at 1-800-791-9458.
• Store the snow thrower in a clean, dry place. Cover it in order to provide added protection.
• Always store battery and charger indoors.
Loading ...
Loading ...
Loading ...