TOOLBOX GRAPHICS PACK
MODEL NO: APTBG SERIES
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. INTRODUCTION
Toolbox graphics pack compatible with Model No’s AP26479** range of toolboxes. Fully resistant to water and oil. Two adhesive
strips on the back of each piece make these easy to apply.
2. SPECIFICATION
Model No. ....................................................... APTBG Series
Country :..............England /01, Scotland /02, Wales /03, Ireland /04, Union Jack /05)
Compatible with: .............AP26479T, AP26479TB, AP26479TO, AP26479TC
3. APPLICATION
Forthemostaestheticallypleasingnishwerecommendthateachdrawergraphicislineduptotheverybottomofthedrawer
covering the lip.
Each drawer graphic is labelled 1-7 with 1 being the top drawer.
1. Remove tape from both adhesive strips on the back of the graphic plate.
2. Line graphic plate up with the bottom of the drawer.
3. Press graphic plate and smooth over with both hands to ensure it has stuck correctly.
Repeat steps 1-3 until all 7 graphic plates have been stuck.
4. MAINTENANCE
4.1. Wipe soiled surfaces with clean, dry cloth.
APTBG Series Issue 1 22/04/20
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
