VALUE SAFETY GLASSES
MODEL NO: 9204
1. INTRODUCTION
BS EN 166/F - Clear polycarbonate safety lens.
2. SAFETY
9 This product is designed for eye protection against high speed particles of low energy impact. They are designed to be lightweight and
comfortable to wear.
9 The product protects against high speed particles, but may transmit impacts, thus creating a hazard to the wearer.
9 Avoid liquids as small particles can splash into the eyes.
9 Inspect the glasses frequently as a pitted or scratched face shield reduces vision and should be replaced immediately.
8 DO NOT use if any part of the glasses is cracked or broken.
8 DO NOT place this product on a hot surface.
8 DO NOT use these glasses for protection against short circuit electric spark, ne dust, gas, ultra violet or infra red radiation, ionising
radiation, liquids under pressure or other severe hazards.
8 DO NOT use these against heavy impact hazards.
3. SPECIFICATION
This product meets the requirements of the standard BS EN 166.
3.1. OPTICAL CLASS - 1 - suitable for work with high vision requirements for permanent use.
3.2. MECHANICAL RESISTANCE - F - Low Energy Impact
4. MAINTENANCE
4.1. CLEANING
8 DO NOT use abrasive materials.
9 Using a soft and clean brush or cloth, use warm suds to wash and clean. Ensure hands are clean (without grease).
9 Materials which may come into contact with the wearer’s skin could cause allergic reactions to susceptible individuals. The contact
areas should be disinfected regularly.
4.2. STORAGE
9 Store in a bag or case out of direct sunlight, away from chemicals and abrasive substances, in a clean dust free environment.
9 Use original bag for transportation if possible.
5. EXPIRY DATE
5.1. Product shelf life/expiry date is 5 years from date of manufacture, after which the product should be replaced.
9204 Issue 3 (1) 12/12/23
Original Language Version
© Jack Sealey Limited
REFER TO INSTRUCTIONS
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE
AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland
UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
REGISTER YOUR
PURCHASE HERE
This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective
Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.
