Loading ...
Loading ...
Loading ...
Shure Incorporated
13/27
2.
•
•
1.
2.
3.
Intel Update Utility: This requires you to download the update app, run the app and allow it to scan your computer for
required driver updates. Download the app here: Intel Update Utility.
Note: The Intel Update Utility is recommended because it requires fewer steps. Refer to your PC user manual for more information.
Bluetooth Accessory Quick Start Guides
BT1 quick start
BT2 quick start
Charging the Earphones
Red LED indicates low battery.
Connect earphones to charging device using supplied cable.
LED is red while charging.
When earphones are charged, LED turns off.
Warning: Before charging, make sure the product is at room temperature, between 0 to 45°C (32 to 113°F).
Note: Use this product only with an agency approved power supply which meets local regulatory requirements (e.g., UL, CSA, VDE, CCC, INMETRO).
BT1 FAQ
For more information, or to view other Frequently Asked Questions, visit the Shure FAQ.
Remote + Mic, Telephony, Voice Command and In-App use
Q.) How do I pair my wireless Sound Isolating earphones with my device?
™
A.) With the BT1 product OFF, activate pairing mode by holding center button for 7 seconds on the remote. Navi
gate to Bluetooth settings in the source device settings, and the device SHURE BT1 should appear in available de
vices. Select BT1, and your device should be paired.
Q.) How do I set up multi-point pairing? How do I change active devices?
A.) Multipoint pairing, a feature of Bluetooth 4, is set up automatically—pair a second device (power cycle by hold
ing the power button down until the earphones turn off, and press again for 7 seconds to enter pairing mode). The
playback between devices should be triggered by new activity (incoming call, new playback). If devices do not au
tomatically recognize the BT1 as an output device, manually disconnect and re-select the BT1 in device settings.
Loading ...
Loading ...
Loading ...