Loading ...
Loading ...
Loading ...
Introduction
1
B. Thread an Ethernet cable (the end with no RJ-45 connector) and the optional power
adapter wires from the back panel through the conduit connector.
Figure 1-12
IMPORTANT: Use the supplied ruler and leave about 14 cm of the Ethernet cable between
the connector on the camera and the conduit connector.
C. Re-install the cap. Make sure the cap is installed tightly to waterproof the camera.
6. Connect the wires to the camera and insert the memory card to the memory card slot. See
1.3 Overview, 1.5 Connecting the Camera and 1.6 I/O Connector.
Tip:
Unscrew the indicated screws and lift the camera to help you connect the wires and
insert the memory card.
14
Loading ...
Loading ...
Loading ...