Loading ...
Loading ...
Loading ...
3
SAFETY PRECAUTIONS
• Do not connect or disconnect the electric plug with wet hands.
• Never clean the icemaker with flammable fluids. These fumes can create a fire hazard or explosion.
Do not store gasoline or other flammable vapors/liquids in the vicinity of this or any other appliance.
• Always turn unit off and disconnect power and water line before servicing.
• Replace all panels after servicing or maintenance.
•
Do not attempt to repair or replace any part of the icemaker unless specifically recommended by the
manufacturer. All other servicing should be referred to a qualified technician.
• Have two or more people to move and install this icemaker. Failure to do so may result in injury.
•
Never install or operate the unit in an enclosed area, such as a closed cabinet. Choose a
well-ventilated area with temperatures between 50°F to 100°F. The unit MUST be installed in an
area protected from the elements, e.g., wind, rain, water spray or drips.
• Do not locate next to ovens, grills or other sources of high heat.
• The icemaker must be installed with all electrical, water and drain connections in accordance with
state and local codes.
• Do not kink or pinch the power supply cord between the icemaker and cabinet.
• The unit must be leveled in order to work properly.
•
All installations must be in accordance with local plumbing code requirements.
• Make certain the pipes are not pinched or kinked or damaged during installation.
• Check for leaks after water line connection.
• Never allow children to operate, play with or crawl inside the icemaker.
•
Although the unit has been tested at the factory, due to long-term transit and storage, the first
batches of cubes must be discarded.
•
Never turn the water supply tap off when the icemaker is working.
•
If the icemaker has not been used for a long time, clean thoroughly before use. Follow instructions
provided for cleaning and sanitizing. Do not leave any solution inside the unit after cleaning.
•
The plug must be accessible after installation.
•
DO NOT use solvent-based cleaning agents or abrasives on the interior. These cleaners may
transmit taste to the ice cubes, or cause damage or discoloring to the interior.
•
The ice machine cleaner contains acids. DO NOT use or mix with any other solvent-based cleaning
products. Use rubber gloves to protect hands. Read and follow safety instructions on the container.
•
Do not use this appliance for other than its intended purpose.
•
Do not touch the evaporator by hand when unit is operating.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities or lack of experience and knowledge, unless they have been given
supervision/instruction concerning the use of this appliance by person responsible for their safety.
• Connect to a potable water supply only.
•
If the supply cord is damaged, it must be replaced by the manufacturer, a service agent or similarly
qualified person in order to avoid a hazard.
• SAVE THESE INSTRUCTIONS.
TECHNICAL INFORMATION
Model IM-600US
Electrical input 115V ~ 60Hz
Power consumption 12.2kWh/100 lbs of ice
Ice-making/Ice harvest rated current 3.0A / 3.6A
Unit dimension 14.6(W) x 23.6(D) x 32.8(H) inches
Unit weight 84 lbs
Ice storage capacity 25 lbs (maximum)
Ice-making capability 50 lbs/day*
Ice shape Cube
Ice cube dimension 0.75 x 0.75 x 1 inch
The technical data and performance index listed above is for reference only.
* The actual quantity of ice produced per day will vary with room and water conditions.
Loading ...
Loading ...
Loading ...