Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
TOPCHESTS MIDBOXES SOFT CLOSE DRAWERS POWER BAR
Original Language Version
© Jack Sealey Limited
TOPCHESTS & MIDBOX, SOFT CLOSE DRAWERS
POWER BAR
1. SAFETY
To avoid tipping, DO NOT open more than one drawer at a time.
DO NOT climb on the drawers.
Close and secure all drawers when moving.
Ensure that the plug is removed from the mains socket and the cable stored before moving the toolbox.
2. FITTING POWER BAR
2.1. Thepowerbarmaybettedtoeithertherightorleftcheekofthetopcompartment;bothsidesaredrilledready.
2.2. Feedtheplugandcablethroughtherubberapontheappropriateside.
2.3. Attach the power bar to the side chosen using M3 x 10mm screws supplied.
3. OPERATION
To remove a drawer with roller sliders, pull the drawer completely out, press down the right tab and lift up the left tab, pull drawer off
the slides.
To reinstall the drawer, realign with the internal drawer slide and push until it locks in place.
4. MAINTENANCE
Lubricate slides periodically.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 sales@sealey.co.uk www.sealey.co.uk
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Parts support is available for this product. To obtain parts, please log on to
www.sealey.co.uk, email sales@sealey.co.uk or telephone 01284 757500
