
DISPOSABLE FACE MASKS
MODEL NO’S: 9329/3 & /10 (PACKS OF 3 & 10), 9309/3 & /10
9331/3 & /10, 9304/3 & /10, 9305/3 & /10, 9332/3 & /10, 9333/3 & /10
9334/3 & /10
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
1. SAFETY
9 Aproperlyselectedfacemaskisessentialtoprotectyourhealth.Beforecommencinganytask,pleaseconsultwithqualiedsafety
personneltoensurethatthefacemasktypeandratingoersadequateprotectionforyourintendeduse.
8 DO NOTuseforreghting.TheserespiratorsDO NOT supply oxygen. DO NOTuseinoxygendecientatmospherese.g.tanksor
other poorly ventilated areas (see Limitations to use section).
8 DO NOT use in explosive atmospheres.
9 Foruseonlybytrainedandqualiedpersonnel.Requirementsforleaktightnessareunlikelytobeachievediftherespiratorisworn
against a beard or facial stubble.
9 When transporting this product, retain in the original packaging and keep away from mechanical and chemical hazards.
WARNING! DEVICES MARKED “NR” SHALL NOT BE USED FOR MORE THAN ONE SHIFT.
2. INTRODUCTION
PackofdisposablemasksclassFFP1/2/3NR(seeindividualpackaging).Protectsagainstnon-toxicdustsandwater-based
aerosols.FilterEciency≥80%.ManufacturedtoBSEN149:2001+A1:2009. PLEASE REFER TO APPLICATIONS
TABLE OVERLEAF.
MODEL NO. FFP CLASSIFICATION
9329 FFP1NR
9309 FFP1NR
9331 FFP1NR
9304 FFP2NR
9305 FFP2NR
9332 FFP2NR
9333 FFP3NR
9334 FFP3NR
3. DIRECTIONS FOR USE
3.1. Fit the respirator and check leak tightness BEFORE entering the contaminated area.
3.2. Wear the respirator for the whole duration of the exposure to contaminants.
3.3. UsetherespiratorinaccordancewithapplicableHealthandSafetyRegulations.
3.4. Discard the respirator and replace with a new one if:
-therespiratorisremovedwhileinacontaminatedarea.
-excessivecloggingoftherespiratorcausesbreathingdicultyordiscomfort.
-therespiratorbecomesdamaged.
-(forrespiratorsprotectingagainstvapours;discardifthesmellofvapourspresentbecomesdetectable).
3.5. Leave the contaminated area if dizziness, irritation or other distress occurs.
3.6. Only for single use. No maintenance necessary. DO NOT store and/or reuse after single use.
3.7. Discard the respirator after single use (one shift maximum).
4. FITTING INSTRUCTIONS
NOTE: it is unlikely that the requirements for leakage will be achieved if facial hair passes under the face seal.
4.1. Cup the respirator in the hand, allowing the headbands to hang freely.
4.2. Hold the respirator under chin with nose piece facing outwards.
4.3. Place the lower headband around the neck below the ears. Holding the respirator against the face with one hand, place the top
headband above the ears, around the crown of the head.
4.4. Respiratorswithadjustableheadbandsonly:whilemaintainingthepositionoftherespirator,adjusttensionbypullingtabofeach
headband.(Tensionmaybedecreasedbypushingoutonthebackofthebuckle).
4.5. Mouldthenoseareatotheshapeoftheface,runningthengertipsofbothhandsfromthetopofthenosepiecedownbothsides
whilst pressing inwards.
4.6. CHECK FOR LEAK TIGHTNESS AS FOLLOWS:
-Placebothhandsovertherespiratorandexhalesharply,positivepressureshouldbeinsidetherespirator.Ifairisfeltescaping
aroundtheedgesreadjusttherespiratorbytighteningthenosepieceand/orincreasingthetensionoftheheadbands.
-Repeattheprocedureuntilsatisfactoryfacethasbeenachieved.
IMPORTANT Inthecaseofrespiratorswithnonadjustableheadbandsiftheheadbandsaretooloosetensioncanbeincreasedby
tying a small knot in the headband.
g.1
2
3
6
1
5
4
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS &
CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO
MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR
FUTURE USE.
DisposablefacemasksIssue521/11/23
Original Language Version
© Jack Sealey Limited

5. STORAGE
5.1. Keepunusedrespiratorsintheirclosedboxandstoreandtransportinadry,non-contaminatedarea
between-20+50°Catrelativehumiditybelow75%.
6. EXPIRY DATE
6.1. Period of obsolescence is 3 years from date of manufacture (refer to manufacturing and
expiry date on packaging.
7. LIMITATIONS TO USE
8 DO NOT use these respirators or enter/stay in an area where:
-oxygenconcentrationislessthan19%.
-contaminantsortheirconcentrationsareimmediatelydangeroustolifeorhealth.
-particulateconcentrationsexceedlevelsxedbyapplicablehealthandsafetyregulationsorprotectionfactorxNPFwhicheveris
lower (Nominal protection factors 4.5 for FFP1, 12.5 for FFP2 and 50 for FFP3).
8. APPLICATIONS TABLE
Dust mask grade FFP1 FFP2 FFP3
Protection: Non-toxicdustand/orwaterbased
aerosols.
Minor dust level.
Mild toxic or irritant, solid & liquid
aerosols.
Moderate dust level.
Toxic liquids, solids & liquid
aerosols.
High dust level.
Application: Handling rubble, sweeping, drilling
concrete.
Plastering, sanding rust & soft
wood, grinding & cutting metal,
paint spraying
(excluding2-packisocyanate)*
Paint stripping, sanding of
hardwood or cement, copper,
chromeorarsenic,welding*.
Substance: Flour, chalk, graphite, cotton,
concrete.
Untreated softwood, coal, powder
pesticide,breglass.
Biological, pharmaceutical,
chrome,lime,lead,asbestos(non-
handling).
Filter eciency: ≥80% ≥94% ≥99%
*Theapplicationguideisgivenasanindicationonly.Beforecommencingwithanytask,pleaseconsultwithqualiedsafetypersonnel,
orcarryoutyourownriskassessment,toensurethatthefacemasktypeandratingoersadequateprotectionforyourintendeduse.
Youmayneedtousethismaskinconjunctionwithothersafetyequipment.Theseareparticulateltersonly,anddonotprovide
protection from harmful fumes or gases.
9. APPROVAL
9.1. OurdisposableparticulaterespiratorshavebeentestedandcerticatedbytheBSIGroupTheNetherlandB.V.NB2797,SayBuilding,
JohnM.Keynesplein9,1066EPAmsterdam,TheNetherlandsforEUtypeExamination,orBSIAssuranceUKLtd.AB0086,Kitemark
Court–DavyAvenue,Knowlhill,MiltonKeynes,MK58PPforUKCAconformtityassesment–UK.
Thelteringhalfmaskproducedtrue(EU)2016/425,standardsfromEN149:2001+A1:2009FFP1,FFP2andFFP3NR,UKCAand
CE marked.
DisposablefacemasksIssue521/11/23
Original Language Version
© Jack Sealey Limited
EU | Sealey EU Ltd, Farney Street, Carrickmacross, Co. Monaghan, A81 PK68 Ireland
UK | Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 sales@sealey.co.uk www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycleunwantedmaterialsinsteadofdisposingofthemaswaste.Alltools,accessoriesandpackagingshouldbesorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note:Itisourpolicytocontinuallyimproveproductsandassuchwereservetherighttoalterdata,specificationsandcomponentpartswithoutpriornotice.
Important: No Liability is accepted for incorrect use of this product.
Warranty:Guaranteeis12monthsfrompurchasedate,proofofwhichisrequiredforanyclaim.
REGISTER YOUR
PURCHASE HERE
This document has been drawn up according to Regulation (EU) 2016/425 as amended to apply to GB for Personal Protective
Equipment. The declaration of conformity can be accessed at www.sealey.co.uk.
