Loading ...
Loading ...
Loading ...
19
Grill pan
Grill tray
Telescopic rail
Telescopic rail
ArtNo.331-0005 Removing the grill rail
Fig. 6.2
Fig. 6.3
Fig. 6.4
Fig. 6.5
Broiler pan
Telescopic rail
Telescopic rail
Broiler tray
Control panel and oven doors
Avoid using any abrasive cleaners including cream cleaners,
on brushed stainless steel surfaces. For best results use liquid
detergents.
The control panel and control knobs should only be cleaned
with a soft cloth wrung out in clean hot soapy water – but
take care that no surplus water seeps into the appliance. Wipe
with a clean dampened cloth then polish with a dry cloth. The
oven doors should only be cleaned with a soft cloth wrung
out in clean hot soapy water.
Ovens
The side panels can be removed for cleaning and for cleaning
behind them.
Removing the panels to clean the enamel interior
Some of the lining panels can be removed for cleaning.
If you wish to clean the enamel interior of the oven, you
will need to remove the shelves before removing the ‘Cook
& Clean’ panels . You do not have to remove the support
brackets to remove the panels. Lift each panel upward and
slide forward o the support brackets (Fig. 6.1).
Once the panels have been removed, the oven enamel
interior can be cleaned.
Ret in the reverse order.
Glide out broiler system™
Before you remove any of the broiler parts for
cleaning, make sure that they are cool, or use oven
gloves.
Wash the broiler pan, trivet and broiler tray in hot soapy
water. Alternatively, wash the broiler pan in a dishwasher.
After broilling meats or any foods that soil, leave to soak for
a few minutes in the sink immediately after use. Stubborn
particles may be removed from the trivet by using a nylon
brush.
1. To remove the broiler pan, pull the tray assembly
forwards (Fig. 6.2) and then lift the broiler pan clear of
the broiler tray assembly (Fig. 6.3).
2. For safety, push the broiler tray back into the broiler
chamber.
3. If you need to remove the telescopic runners to allow
cleaning of the broiler chamber, rst remove the
broiler tray then you can unhook them from the broiler
chamber sides (Fig. 6.4).
4. Wipe the sides clean with a soft cloth and mild detergent.
DO NOT put the side runners in a dishwasher.
5. Once you have nished, hook the side rails back onto
the sides of the chamber. Pull the telescopic rails out
and t the broiler tray onto them, making sure to locate
the cut-outs onto the telescopic runner tabs (Fig. 6.5).
6. Replace the broiler pan.
Fig. 6.1
Loading ...
Loading ...
Loading ...