Loading ...
– 2 –
THANK YOU FOR PURCHASING A CAFRAMO BORA FAN!
INSTALLATION
Requires a 3 amp fused circuit. Use the two supplied machine screws to attach the fan base.
Connect the wire marked(+++) to a positive wire and connect the other wire to a negative ground
wire. If the fan does not rotate in a clockwise direction, reverse polarity to correct.
OPERATING INSTRUCTIONS
The blade must be clear of any obstructions that would cause the blade to jam. Secure locking
cam in position before turning on. Depress button on the face of fan once to turn on. Depress
button again to adjust speed levels and to turn fan o.
READ AND SAVE THESE INSTRUCTIONS
Warning:
• Do not position too close to any objects that may be drawn into the blades and stop the airflow
• Do not use outdoors
• Do not use on wet surfaces or immerse in water
• Never allow water to drip into motor housing
• Do not use if wires become frayed or brittle
• Do not use near fireplaces, furnaces, stoves or high temperature heat
• This appliance is not intended for use by persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety. Children
should be supervised to ensure that they do not play with the product.
CARE AND MAINTENANCE
The Bora requires very little maintenance. By following the instructions within this manual, the fan
will operate problem-free for years. Tum power o to clean. A vacuum can be used to clear the
fan of any dust build-up and a dry cloth may be used to wipe the surface. Do not use gasoline,
thinners or other harsh chemicals to clean fan.
SPECIFICATIONS (3 SPEEDS)
12 Volt: 0.15, 0.18 and 0.27 amps
24 Volt: 0.06, 0.10 and 0.18 amps
Grip handle to adjust position of fan.
3 speeds
Push-button control
Unlock cam to adjust vertical position.
Lock to hold fan in place.
Loosen stand-nut to swivel fan position
from side to side.
Loading ...
Loading ...
Loading ...