Loading ...
Loading ...
Loading ...
If uncheck the funcon, you should set the IPv4 address, IPv4 subnet mask, IPv4 default
gateway, IPv6 mode, IPv6 address, IPv6 subnet prex length, IPv6 default gateway, Mac address,
and MTU.
If you check the funcon, the system will allocate the IPv4 address, IPv4 subnet mask, the IPv4
default gateway, IPv6 mode, IPv6 address, IPv6 subnet prex length, and IPv6 default gateway
automacally.
DNS Server
Set the preferred DNS server and the Alternate DNS server according to your actual need.
Set Wi-Fi Parameters
Set the Wi-Fi parameters for device wireless connecon.
Steps
Note
The funcon should be supported by the device.
1.
Click Conguraon → Network → Network Sengs → Wi-Fi .
Figure 9-4 Wi-Fi Sengs Page
2.
Check Wi-Fi.
3.
Select a Wi-Fi
-
Click Connect of a Wi-Fi in the list and enter the Wi-Fi password.
-
Click Manual Add and enter a Wi-Fi's SSID, working mode, security mode, and password. Click
OK.
4.
Set the WLAN parameters.
DS-K1T673 Series Face Recognion Terminal User Manual
98
Loading ...
Loading ...
Loading ...