Loading ...
Loading ...
Loading ...
Steps:
1. Paste the dill template to the ceiling.
2. Drill the screw holes and cable hole (optional) in the
ceiling according to the drill template.
Figure 2-15 Drill Template
Note:
Cable hole is required, when adopting the ceiling
outlet to route cables.
3. Disassemble the camera to remove the bubble.
Figure 2-16 Remove the Bubble
4. Attach the back box of camera to the ceiling and
secure them with supplied screws.
Figure 2-17 Attach the Back Box
Note:
The supplied screw package contains self-tapping
screws, and expansion bolts.
For cement ceiling, expansion bolts are required to
fix the camera. For wooden ceiling, self-tapping
screws are required.
5. Route the cables through the cable hole, or the side
opening.
6. Connect the corresponding cables, such as power
cord, and network cable.
7. Power on the camera to check whether the image
on the monitor is gotten from the optimum angle. If
not, adjust the camera according to the figure below
to get an optimum angle.
Loading ...
Loading ...
Loading ...