Loading ...
Loading ...
Loading ...
18" Monolith Freezer
* Estimated energy cost will depend on utility rates and use. Estimated energy cost
based on a national average electricity cost of 12 cents per KWh.
** Noise output – according to EN 60704-3.
*** Please contact your Liebherr Authorized Dealer for door reversal.
Inset
A = 8 1/4" (210 mm)
B = 1/2" (12.5 mm)
C = 19 7/8" (505 mm)
Frameless
A = 8 1/2" (216 mm)
B = 1/2" (12.5 mm)
C = 20 3/8" (517 mm)
Dimension A = without
mounted door handle
MF 1851
A
Cabinet depth frameless installation style = 25" (635 mm)
Cabinet depth inset installation style = 25" (635 mm) +
panel thickness.
B
At this point the power cord exits from the appliance
rear. 3/4" (19 mm) from the left and 5" (127 mm) from
the floor. Free length of the power cord is 98" (2.5 m).
C
The appliance has a recess in this area for cable and
waterline laying. 1" (25 mm) in depth and 5 1/2" (140 mm)
in height over the whole width of the appliance.
D
This surface is visible when the appliance door is open.
Designed finish is required.
E1, E2
Depending on the appliance, the anti-tipping bracket is
positioned at the top (E1) or base (E2) of the appliance
and must be secured to the wall or to the floor, please
refer to the installation manual for more information.
18" recess
Inset installation style
H = 79 7/8" (2029 mm)
W = 17 3/4" (451 mm)
Frameless installation style
H = 80" (2032 mm) Add overlapping
dimension to the panel on the top.
W = 18" (457 mm) Add overlapping
dimension to the panel on both sides.
Panel thickness: Min. 5/8" (16 mm)* / Max. 1" (25.4 mm)
Panel and handle weight: Max. 55 lbs. (25 kg)
4"
(102 mm)
18"
(457 mm)
A
B
13 3
2 /16" - 4
/16
"
(72 - 106 mm)
3"
(76 mm)
3"
(76 mm)
DD
84"
(2134 mm)
C
E1
E2
18"
(457 mm)
A
B
3"
(76 mm)
3"
(76 mm)
DD
84"
(2134 mm)
C
E1
E2
W
H
~
8.8 ft (2400 mm)
~
6.5 ft (2000 mm)
* If a shaker style panel is used, which is thinner than the minum panel thickness, shorter screws than those supplied in the accessory pack must be used.
C
30 31
Available Accessories
· Stainless steel panel
· Monolith brushed aluminum square handle
· Monolith stainless steel round handle
· Monolith brushed aluminum soft-edge handle
· Stainless steel Toe Kick
· Reverse door kit
See pages 56–59 for available accessories for
single units and Side-by-Side combinations.
Individual Toe Kick
Cut out Dimensions
Door Panel Dimensions
and dimensions of free length for power
Product Dimensions
Continuous Toe Kick
↑
↓
18″
17
3
/
4" (450 mm)
412
50 *
39 **
7.8 (222)
4
3
3
InfinitySwipe
+7 °F to −17 °F (−14 °C to −27 °C)
automatic
InfinityLight
yes
fixed water connection
3.5 (1.6)
4 (1.8)
left, reversible ***
83 3/4" / 17 3/4" / 24"
212.6 / 45 / 61
84" / 18" / 25"
213.4 / 45.7 / 63.5
299.8 (136)
115/60
Energy consumption (kWh / y)
Estimated Yearly Energy Cost in US $
Sound rating dB(A)
Freezer capacity cu.ft. (l)
Number of shelves
Number of door racks
Number of FrostSafe drawers
Electronic control
Freezer temperature range °F (°C)
Defrost type
Interior light
Water filter
IceMaker
Ice cube output lbs. (kg) / 24h
Ice cube stock lbs. (kg)
Door hinges
Product dimensions
in inch (H / W / D)
in cm (H / W / D)
Cut out dimensions
in inch (H / W / D)
in cm (H / W / D)
Net weight lbs. (kg)
Voltage V / Hz
IMPORTANT!
Stated minimum height dimensions
include when the leveled feet are fully
inserted.
Height can be increased by a maximum of
3/4" (19 mm) by turning the adjustable feet.
When the appliance is fitted in the recess,
the appliance must be raised by turning the
adjustable feet so that the appliance top
has contact with the anti-tipping bracket.
This results in a 4" (102 mm) Toe Kick height.
Width will increase by 1/4" (6.5 mm) when
mounting strips are installed.
Loading ...
Loading ...
Loading ...