Loading ...
Loading ...
Loading ...
120 - USE 91477A081/F
Manual reservoir filling
1. Fill a jug supplied or a container with a
sufficient amount of water for the duration of
the functions that you wish to use.
2. Open the appliance door.
3. Place the jug (or container) on the open
door.
4. Touch the OTHER FUNCTIONS
button on the "main menu" (in the main area
).
5. Touch the sub-menu button (located in
the lower area ).
6. Touch the FILL RESERVOIR button.
7. Remove the loading wand from its holder.
• To remove the loading wand, press on the
front of the wand until the spring contracts,
then release.
or
• Touch the WAND button on the
display (positioned in the lower area ).
8. Place the end of the tube at the bottom of
the jug (or container).
9. Press the start button to start filling the
appliance reservoir with water.
10.When finished, shake the loading wand to
remove any water residue.
11. Place the loading wand back in its holder.
12. Remove the jug (or container).
13.Close the door.
Function for filling water (or other
liquids) into the reservoir.
The jug (or container) with the water
must have a gross weight lower than 5
kg.
Pay attention to the distance to be
maintained so as not to be hit by the
wand projection.
When the door is closed, an automatic
system will automatically draw in any
residual water in the loading wand to
avoid drips. A bubbling noise may be
heard; this is completely normal.
Loading ...
Loading ...
Loading ...